00-04 Focus IB5 Manual Trans D/S & P/S Front Cv Axle Shafts FD8047 FD8048

This is a Brand New Set of Front Driver and Passenger Side Cv Shaft Axles than will fit the following Ford's Years and Models:

• 2000-2004 Focus with IB5 Manual Transmission ( Stop Look Check you must know this info ) ( Will not fit SVT )
  

Check Vehicle for Compatibility

Kit Includes:

1 x PART # FD8047 Front Axle Drivers Side
1 x PART # FD8048 Front Axle Passengers Side

2-Year Warranty

TORQUE SPEC. refer to oe for ft lbs 2 year Warranty

Boot & Shipping are not covered.

IMPORTANT

• Proper axle torquing procedures
• It is imperative that you follow the manufacturer's specifications to insure the axle is installed correctly. Failure to follow the manufacture's procedures can result in failure of your new axle & hub bearing.
• One of the most common mistakes during installation is improper torque of the axle spindle nut. Over torque of the axle spindle nut can cause the bearing and axle to overheat , which will dramatically reduce the life of your new axle & hub bearing assembly.
• While it may appear to be easier to use an impact wrench , it is not recommended. A torque wrench is !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
• Every vehicle has specific torque specifications , and it will be listed after the axle part number.
• New axle failure may also be caused buy broken or worn engine or transmission mounts.
  

Condition: New

• Brand: Mac Auto Parts
• Manufacturer Part Number: 139152
• Interchange Part Number: FD8047 FD8048
• Placement on Vehicle: Left,Right,Front
• Surface Finish: NEW
• Warranty: 3 Years